First, the manual that comes with the camera is written very small and in Cineese-English. It is very hard to read and understand.
I immediately charged and then inserted a 32gb SD card. When trying to remove the SD card, it was not possible. I replaced the USB cover then removed it and tried to remove the SD card. This time, it was removed and I don't have that problem any more.
Trying to operate the camera using the included Chineese-English written instructions was almost impossible. Therefore, I am going to try writing instructions that may help you get started.
To begin with, there are three switches that are used to control the camera. Position the camera flat on a surface so the lens is faceing you and the USB cover is away from you. You want the two switches to be on the right, and the one switch to be on the left. On the right, the switch closest to the USB is K1 and the switch closest to you is K2. The switch on the left side is K3.
If the camera gets hung up, press K1 nd K2 at the same time.
To turn on the camera, press and hold K1 for about five seconds. The red LED will come on and you will feel the camera vibrate. Release K1.
To take a single snapshot, aim the lens at the subject and quickly press K2. The LED will blink blue, then return to red.
To take video, aim the lens at the subject then press and hold the K2 for about five seconds. The LED will blink red twice along with vibrations, then the LED will go off. To stop the recording, quickly press K1.
To turn on motion sensing, with the video on, quickly press K3. The LED will blink red three times and the camera will vibrate three times.
To turn OFF the motion sensing, quickly press K3. The camera will vibrate once.
To turn off the camera, press and hold K1.
Click Here For More Information About LAYEN Hidden Detection Recording Device
0 comments:
Post a Comment